U-panel type Jumbo Bag made of circular, uncoated PP woven Material , white colour
fabric (160 GSM), UV stabilized.
1 Filling Spout – Dia 35 cm x Height 50 cm
2 Discharge Spout – Dia 35 cm x Height 50 cm
3 Lifting Loop – 04 nos. Corner loop, 30 cm above the bag
4 S.W.L – Over 1000 Kg.
5 Safety Factor – 5:1
6 Bag weight – 1.5 kg. (+/-2%)
7 Bag size (+/-2% cm.) – (90-120) x (90-120) x 150cm
FIBC bags are mostly suitable for various solid materials, such as: chemical raw materials, pharmaceutical raw materials, additives, mineral materials, refractory materials, etc.
Precautions for loading and unloading tons of bags
Although the use of big bags is very extensive and convenient, when using big bags, they must also be strictly implemented in accordance with the construction specifications. Below is some popular science for you, about the precautions when loading and unloading ton bags.
1. After use, it is necessary to wrap the ton bag with paper or opaque shed cloth and place it in a ventilated position.
2. During operation, such as loading and unloading, it is necessary to keep the ton bag upright.
3. It is forbidden to drag the ton bag on the ground or concrete to prevent the friction from being scratched
4. When handling tons of bag goods, try not to shake, you can use pallets for transportation.
5. When the ton bag is not in use, try to fold it as much as possible to reduce moisture and sunlight exposure. Avoid shortening the service life of the ton bag due to the external environment.
6. When the ton bag is used for the second time, the previous items need to be emptied to prevent the loss of materials caused by the mixing of items.
7. When stacking ton bags, it should be noted that if it is a granular, block, or flow-like object, the bottom needs to be flattened and installed, and the bottom two rows are placed at the bottom, and the third row is carried out upward. Cross stacking. Only in this way can the stability of the ton bag be guaranteed.